Contact TimberSIL of Texas

The TimberSIL of Texas distribution center is located in Houston, Texas. Our showroom is open to the public Monday through Friday 9am-5pm, both delivery and will-call picks up are available.

Distribution Center:

3600 Brittmoore Rd,
Houston, TX 77043

(713) 351-6520
(714) 351-6555  fax
http://www.woodwontburn.com

 

Advertisements

25 responses to this post.

  1. Posted by Cort Kloke on March 6, 2010 at 5:18 pm

    Does this material have structural qualities similar to Douglas fir? The application is for stringers and perhaps steps of an outdoor wooden garden stair requiring stringers of up to 20 ft. long, probably 4 inch dimension. If yes, how do I get pricing and technical information.

    Reply

    • Mr. Kloke,

      TimberSIL has greater structural values than Douglas Fir. The species of wood TimberSIL processes, Southern Yellow Pine (SYP), is stronger and harder than Douglas Fir before we put the glass inside. The TimberSIL process increases those structural values, allowing you to increase spans.

      For pricing and availability please call (714) 223-1804 or e-mail: sales@woodwontburn.com

      Reply

  2. Posted by Stella on April 27, 2010 at 1:43 pm

    Can I swing by the warehouse to purchase TimberSil? I work so close and my husband is entirely convinced of your product.

    Reply

  3. Posted by marcy vaj on May 3, 2010 at 6:01 pm

    Sadly, I missed the Alt Expo in Sta Monica. Do you have a distributor here?

    Reply

  4. Posted by Art Koustik on July 13, 2010 at 2:34 pm

    I am almost sure our patio cover is infested with termites. A friend recommended I talk to you.Do you have any brochures w/prices. I realize it will vary. Thank you, Art

    Reply

  5. Posted by david bentley on July 16, 2010 at 11:53 am

    We have a 85 unit apartment building in Torrance that has approx 250 each rafter tails that we would like to replace with a new roofing project scheduled for later in 2010. Do you make rafter tails?

    Reply

  6. Posted by Dan Rodriguez on September 6, 2010 at 12:20 pm

    I’m looking to buy some 1x material to cover metal treads on a spiral staircase. What is the widest 1x stock you have and what is the cost per board foot? I’m looking for a lighter color wood, similar to pine. Does this take a clear coat finish?

    Reply

    • We stock 1×4, 1×6 & 1×8. Yes TimberSIL does take a clear finish, however the wood does need to be sanded first. I recommend 40-60 grit, TimberSIL is very high on hardness level if you use a smoother grit you’ll be there all day.

      Reply

  7. FYI; Just saw the latest episode of Ask This Old House. Roger Cook the landscape contractor build a 24’ by 4’ raised planter bed for a guy who’s bound to a wheelchair. The material he used was the glass infused 6”x6” timber. I’m pretty sure it’s a TimberSil product. He built the whole planter with this timber and looks great. I can’t wait to have a project that calls for TimberSil product. I’m dying to work with it.

    Michel K, Master Carpenter

    Reply

  8. Posted by Wes Zinke on November 28, 2010 at 8:31 pm

    I also was just introduced to your products availability while watching This Old House.. its looks like just what I’ve been looking for.. a friend saw the same episode, and has a few projects lined up to use it on.. so we plan to team up.. now we just need to know where we can purchase it.. in Lodi, CA? We are interested in 6×6, 2×4, 2×6.. what lengths do you offer these in? Do you have a brochure.. price list.. also would be interested in a sample? Thanks.

    Reply

  9. Posted by Tim on May 5, 2011 at 6:43 pm

    Does anyone have suggestions for a fairly non-toxic sealer for Timbersil?

    Reply

  10. Posted by Jim Ferr on June 10, 2012 at 2:26 am

    How does the cost compare with lumber?

    Reply

    • There is lumber that is more expensive per piece than TimberSIL and there are others that are less per piece. To compare the price of TimberSIL fairly you have to factor in the added strength, which would require less pieces of wood used on the projects, the rot and insect resistant, the Class-A fire rating and the value of using a non toxic product on or around our your home.
      Contact us for current pricing. As far as I know, TimberSIL is the least expensive wood that resists fire and rot.

      Reply

  11. Posted by Todd on July 10, 2012 at 8:31 pm

    I see some of the example projects use boards which were pre-cut, then fused w/ the glass (https://timbersil.wordpress.com/2011/07/14/picnic-shelter-salt-creek-beach-dana-point-ca/). It stated this was done for maximum rot resistance. This leads me to believe the glass is fused only to a certain depth into the wood, and cut ends have untreated exposed wood fibres.

    Can you provide details about glass impregnation and how cutting/machining the wood affects durability in an outdoor environment (e.g. buried fence posts, exposed fencing)?

    PS: great looking product – I’m hoping you assuage my concerns so I can buy a truckload for my new fence!

    Reply

    • Todd, All the wood in these photos is TimberSIL except for the large glue-lam beams, because of the size and length require for the project the beams were not able to be made from one piece of wood. However you are correct, as with all wood preservation processes the protecting treatment can only perpetrate the wood’s surface so far. So, on this project all the corbeled ends on the 4×8’s were cut to length and shaped prior the glass impregnation process. On 2x material and smaller the glass penetrates throughout the boards, on larger sizes you should have them custom made or coat the ends with an epoxy wood hardener to effectively seal of the cut end.

      Reply

  12. TimberSIL is wonderful.

    Reply

  13. Posted by Missy Chapman on January 17, 2013 at 10:08 am

    We are interested in building a swinging porch swing out of your product. Can you refer rest to someone who has designs and we would also like pricing information.

    Thank you

    Reply

  14. Posted by Mike Martinez on May 15, 2013 at 7:43 am

    Thinking about using your product to build a deck around a desert hot spring. How is product priced and how is it rated for use above and under hot water (access ramp, stairs into (earthworks) swimming hole)?

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: